Airius System 35 Installationsanleitung PDF herunterladen (Seite 6)

Do not position product near furnaces, fireplaces, stoves or other high temperature heat sources. Do not position Air Pear

unit such that the downward air column created by the Air Pear will be directly bisected by another source of air flow, such

as from another fan or from an open supply register. Do not position the unit close to other objects that will interfere with fan

operation. Do not allow fan blades to come into contact with objects that can lock or inhibit the rotor operation.

Service and installation: No lubrication is required. Bearings are sealed. Bail adjustment can be made with a T-30 Torx

driver/wrench, or a 5/32” Hex wrench may be used. Other tools for service: T-20 Torx (7/64” Hex) & T-25 Torx (1/8” Hex)

and a #2 Phillips screwdriver.

The Air Pear unit is designed to be used with only the electrical voltage identified on the label located in the nozzle and on

the bottom of the motor. Connecting to any other voltage could damage the motor and create an electrical hazard and will

void warranty.

Assembling Suspended Ceiling kit: See additional instructions for kit included with this pamphlet or located in box containing

kit.

Important: Install with hanging device or fastener rated for a minimum of 60 pounds (27 kg). Use care when positioning the

unit. To maximize performance, make sure the airflow is unobstructed into the top of the unit and that the downward airflow

is unobstructed and allowed to reach the floor.

Model numbers reference maximum mounting heights in feet; 10 ft = approximately 3 meters. Each unit is designed to cover

approximately 800-1200 sq ft (75-110 m²) of floor area or a max 40 ft (12 m) diameter circle.

Cleaning: Unplug unit from power source first to prevent electrical shock and to avoid injuries from spinning blades.

Caution: stationary blades can cause injury! You may clean the plastic housing with a warm cloth, using mild detergent only.

Do not use petroleum products, thinners, solvents, ammonia, alcohols or other chemicals to clean any part of the Air Pear

unit.

USA & Canada – ETL file #3164849 EU - CE

For additional information about

Air Pear® Thermal Equalizer®

and other products/accessories visit:

www.theairpear.com

Safety Precautions - Read & Save (cont.) Safety Precautions - Read & Save (cont.)

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Keine Kommentare

Airius System 35 Installationsanleitung Seite 6